8147 record(s) found.

Improvement List


Area: Subarea: Sort By: Status

Search Description:

InfoAreaSubareaDescription
MCR: JTLS-2018-13674
Date: 2018-03-05
Status: Accepted
ToolsAllow Variable Number of Ad-Hoc Web Login Columns

Three columns have been added to the Web Login Page of the Apache server to allow scenario specific requirements. These cells are used by creating server side HTML files named _adhoc.shtml in the $JGAME/web_active/webroot/ directory structure. The ICP looks for these files with numbers 1 through 3 when it writes the scenarios.html file. Recently 3 adhoc columns have not been enough for exercise requirements and the ICP code has been modified at the exercise to support 5 adhoc files. A better solution would have the ICP determine the maximum number of adhoc files for the various scenarios on a server and automatically adjust the number of columns based on the file requirements.
MCR: JTLS-2018-13672
Date: 2018-03-05
Status: Accepted
ToolsCopying DDS Reports and Maintaining Formatting

Recently there was a requirement to get a DDS report to a Response Cell (RC). At the time the mail system was not functioning properly. Other ways existed to make a file available if the data within the report could be captured. A copy and paste of the data from the TRIPP Report Browser did not copy the HTML formatting. A copy and paste into a spreadsheet placed everything into the first column losing the row and column concept. A need exists to be able to capture the contents of the Report Browser and copy it into other tools while retaining the formatting. This could be as simple as a "show source" button that exists on many web browsers allowing the HTML markup to be captured with a copy and paste.
MCR: JTLS-2018-13671
Date: 2018-03-05
Status: Accepted
WHIPSite Specific CADRG Files

A set of CADRG maps is delivered with a JTLS release in the ~/CADRG directory. This is the standard directory on a Linux system that the WHIP/DDS/JOBE look for CADRG maps. When updating a system it is important to verify that the CADRG directory does not contain site-specific maps before replacing the directory. In order to avoid this issue the WHIP/DDS/JOBE should support a ~/game/data_site/CADRG directory that may contain additional CADRG maps, allowing the end user to place their site-specific data outside the standard release directory structure.
MCR: JTLS-2018-13670
Date: 2018-03-05
Status: Accepted
C4IEnhanced Reformat Spreadsheet Program

This is probably not the first time I've submitted something like this, but I have some new ideas here. The Reformat Spreadsheet Program (RSP) requires a Comma Separated Value (CVS) file for input that contains a single type of order. The user is then required to map each column of the file to a field from the order using the order keywords. This is done as a command line interface. The task of using the RSP could be simplified with a Graphical User Interface (GUI) driven program. The program should be capable of reading an Excel spreadsheet directly, displaying multiple sheets of data in different tabs, allow the assignment of an order or utility to each tab, allow the assignment of a field to each column within the tab, and output either a Read Order File (ROF), a group of orders for a specific WHIP, or a JTLS Order Spreadsheet for a WHIP.
MCR: JTLS-2018-13656
Date: 2018-03-05
Status: Accepted
ToolsHiding Password Fields

The user account tab for the DDS Configuration Program (DCP) contains user names and passwords. The passwords are printed with stars, i.e. ****, by default but an icon exists next to each one that the Tech Controller can press to see the actual password. This capability should be extended to other Tech Control tools where a password exists such as the ICP, the Javamenu for DDS and AAR access, etc.
MCR: JTLS-2018-13618
Date: 2018-02-11
Status: Accepted
C4IMake JTOI A Service

In JTLS 4.1, all of the programs that link to various C4I systems were supposed to become services. The first attempt at making the JTLS Transaction Operational Interface (JTOI) to real-world air planning systems did not meet end user requirements; therefore, the service version of the JTOI project was canceled. The desire of this ECP is to provide a more robust design for moving the JTOI to the service environment.
MCR: JTLS-2018-13614
Date: 2018-02-07
Status: Accepted
JMRMImprove NWARS Available Data

It was veryu difficult for NWARS to interpret the JTLS provided data concerning active emitters. There simply was not enough time to alter the data structures. A better data model based on NWARS needs to help the ease with which NWARS can link to JTLS.
MCR: JTLS-2018-13613
Date: 2018-02-07
Status: Accepted
ToolsAllow Translation Of Army Missile Orders In ATO

JTLS does not have the concept of processing ARMY land based SSM missile shots scheduled in the ATO
MCR: JTLS-2018-13612
Date: 2018-02-07
Status: Accepted
C4IPass Squadrons To MUSE During Game Execution

We need to think of a way to pass new units to MUSE.
MCR: JTLS-2018-13610
Date: 2018-02-07
Status: Accepted
C4ILog JOI Filter Changes

Provide log entries for individual unit filter changes. Ideally all configuration changes would be placed in this file as well. This would have proven useful during the recent exercise.
MCR: JTLS-2018-13609
Date: 2018-02-07
Status: Accepted
C4IWHIP and JOI Interface Name Improvement

Consider sending Track IDs to the service when modifying filters, instead of using the JTLS Short name. This results is less traffic and no possibilities of the IDs containing spaces or unexpected characters. This also matches up with the JOI console command implementation.
MCR: JTLS-2018-13608
Date: 2018-02-07
Status: Accepted
WHIPFull Screen Message Browser And IMT

Need the ability to full screen the message browser and IMT would be nice. You currently can with the ATOV and it is helpful when dealing with lots of info.
MCR: JTLS-2018-13607
Date: 2018-02-07
Status: Accepted
ModelAirEasy Flush Airbase

The exercise audience gave an order to flush all aircraft from an airbase. There was no easy way to do this in JTLS. We should implement an order to easily accomplish this task.
MCR: JTLS-2018-13591
Date: 2018-02-07
Status: Accepted
JMRMNWARS Reporting Damage Instead Of Maintenance

In JTLS three situations can place combat systems into maintenance: 1. Normal breakdown because of use 2. Specific disease or failure breakdowns 3. Combat There is no easy way for the ELS and thus NWARS to know the difference. The result is that NWARS always reported the systems as damaged even though there was no combat prior to the generated NWARS report. The link between JTLS and NWARS needs to be improved to solve this problem.
MCR: JTLS-2018-13590
Date: 2018-02-07
Status: Accepted
C4IAllow TACELINT Message Filtering

Currently the Tactical Electronic Intelligence (TACELINT) messages are generated by the TACELINT Message Server (tems) for every emitter that is currently turned on for which there exists Electronic Notation (ELNOT data. User would like to filter messages based on data such as country code of the emitter or relationship of the emitter to the C4I side.
MCR: JTLS-2018-13584
Date: 2018-02-07
Status: Accepted
WHIPSetting WHIP Heap Size

For large databases it is necessary to increase the Heap size available to the WHIPs. This needs Technical Control to hand-edit a file. The process of increasing a WHIP's Heap size needs to be much easier to do and it needs to be assignable by WHIP. A WHIP that is executing on a small or old machine may not be able to handle a large Heap size. Setting Heap Side should be a part of the Interface Control Program.
MCR: JTLS-2018-13582
Date: 2018-02-07
Status: Accepted
ToolsRSP Create WHIP Spreadsheets

The Reformat Spreadsheet Program (RSP) takes a spreadsheet of information and creates legal orders that can be submitted to JTLS. It would be nice if this program also had the capability to create a spreadsheet set of orders that coujld be viewed and managed from within the WHIP
MCR: JTLS-2018-13580
Date: 2018-02-06
Status: Accepted
C4IProperly Represent Japanese Link-16 Capabiltiy

Japan does not have the ability to report self-reporting aircraft using Link-16 2.3 messages. They need to report using 3.3 messages. The full Japanese Link-16 reporting capability should be properly represented within JTLS.
MCR: JTLS-2018-13578
Date: 2018-02-06
Status: Accepted
ModelAirAllow Aircraft To Turn Off Mode 2 and Mode 3

Enemy aircraft during combat operations would not use their Mode 2 or Mode 3 transponders. The user should be able to turn these on and off in the same manner that sensors can be turned on or off.
MCR: JTLS-2018-13577
Date: 2018-01-16
Status: Accepted
WHIPSubmarine Battery Warning Message

Is it possible and worth wile to add a ALERT message to the WHIP notifing a WHIP operator when a submarine battery has reached a minimal operating level or capability such as 10% remaining battery life.
MCR: JTLS-2018-13576
Date: 2017-12-13
Status: Accepted
DatabaseIntegrate Error and Warning Text into SVPR

Enter a description of the proposal or issue here.Similar to accessing the DRM pages from the OPMs, I would like to be able to access the DDS User Guide Error and Warning text directly from the SVPR. Not all errors and warnings make sense at face value, this requires the users to open the DDS User Guide and find the text for the error. This is cumbersome especially on small monitors and laptops. Some user are also less likely to care and update data incorrectly just to clear a particular problem. If the text were readily available there would be a better chance of problems being corrected properly. Display of the text could be one of several ways. 1. Include a auto fix option to display the DDS User Guide Page 2. Have the text display using a process similar to context sensitive menus 3. Have the text automatically appear in the bottom of the right hand window when a error or warning is selected. This feature could be turned on or off similar to the wrap function toggles currently in the SVPR.
MCR: JTLS-2018-13575
Date: 2017-12-13
Status: Accepted
DatabaseAdd SVPR NULL Record Notification

The SVPR function contains auto correction options which include the option to display a record from one of the many tables. If the record does not exist the appropriate table is displayed with no records. For a user with little experience this could lead to the user believing there was an error in the retrieval. I recommend adding a pop up warning window to notify the user when no records were selected. This user should be able to turn the pop up window off once they are familiar with the problem similar to the SVPR line wrap fundctions.
MCR: JTLS-2018-13573
Date: 2017-11-21
Status: Accepted
WHIPAllow external applications to draw on WHIP.

Provide a method for external applications like the TechTool to be able to draw on the WHIP.
MCR: JTLS-2017-13383
Date: 2017-10-02
Status: Accepted
ToolsPerform Verification on Order Times

The OMA does not reject ATO Mission Package orders with a time in the past. These are rejected by the model, but if the operator misses the message the next step in submitting an ATO is to send the package missions. These would then be rejected since the package does not exist. If the OMA performed verification on times the error would be caught earlier in the sequence of events.
MCR: JTLS-2017-13382
Date: 2017-10-02
Status: Accepted
WHIPProvide CAS Support Information

There is no way for the WHIP operators to provide information on which air missions respond to a CAS Request. This is a major part of the Response Cell play in both the friendly and sitfor cells.
MCR: JTLS-2017-13381
Date: 2017-10-02
Status: Accepted
WHIPOrder Groups Within Groups

The ATOT produces up to 10 order groups for every ATO that is translated. After 15 days of an exercise this will result in 150 groups within the Order Group Editor. Allowing the capability to put groups within groups would enable to air operator to better manage this large number of orders.
MCR: JTLS-2017-13380
Date: 2017-10-02
Status: Accepted
WHIPWHIP Find On Map for Multiple Objects

The DDS tables allow an operator to select multiple rows and perform a Find on Map for object or locations. This marks every matching object on the map, moving the map frame reference as needed to display each object. This capability is desired but does not exist within the WHIP.
MCR: JTLS-2017-13379
Date: 2017-10-02
Status: Accepted
ModelAirMultiple Squadron Airlift/Airdrop

The model permits the user to use multiple squadrons in an airlift or airdrop by submitting separate airlift/drop orders. For each airlift/drop order either the order can be sent, or a time estimate for the lift can be requested. The time estimate option will only provide the estimate for the specified order and its assets. It is desirable to be able to obtain an airlift/drop time estimate for a multiple squadron airlift/drop.
MCR: JTLS-2017-13378
Date: 2017-10-02
Status: Accepted
ToolsOVT Order Files

Currently the OVT will verify and submit orders directly to the CEP. This provides no method for the operators to view what was submitted or to recall orders. If the OVT had the ability to create actual orders for the player, then the WHIP could perform the verification and submission of orders, and additionally recall orders at a later time. This behavior would mimic the submission of orders from the ATOT.
MCR: JTLS-2017-13377
Date: 2017-10-02
Status: Accepted
ToolsTechTool Moving Views

Currently the TechTool has the ability to move slides and order groups between scenarios, even scenarios on different file systems. A third WHIP created item which would be useful to move is views.
MCR: JTLS-2017-13374
Date: 2017-10-18
Status: Accepted
ToolsTUP/HUP/SUP Combat System DDS Report.

As the size of data repositories grows, the number of TUPs, SUPs, and HUPs will grow making if hard for database builders to find existing prototypes that meet their needs. This report will allow prototypes to be filtered by the number of Combat Systems and/or Supplies they have.
MCR: JTLS-2017-13268
Date: 2017-08-09
Status: Accepted
C4IOutput TACELINT Using TAB37 Format

The desire is to output TACELINT messages using the alternate TAB37 format.
MCR: JTLS-2017-13263
Date: 2017-08-04
Status: Accepted
ModelGroundBDA Report Needs Separate HRU Section

HRU kills and damage are reported in BDA reports but are listed under the Ground Combat section. It is desired that a separate section that lists the kills by HRU be added to the report.
MCR: JTLS-2017-13262
Date: 2017-08-04
Status: Accepted
ModelNavyRepresent Port Capacity

Represent the number of ships that can be in port at any one time. The model does present the number of MHE facilties owned by the port, and only so many ships can be off-loaded at once, but nothing makes these ships line up outside of port waiting for a berthing position. This function is desired.
MCR: JTLS-2017-13261
Date: 2017-08-04
Status: Accepted
ModelNavyChange Smoke Time Improvement

In a recent test, several ships were hit and they started to smoke. The Controller them went in and changed the time that smoke should persist from the 13 hours in standard database to 5 minutes. This change was desired to insure that MUSE and NWARS stopped seeing the smoke. The database parameter was changed, but it had no effect on the ongoing smoking ships. The desire is to have the change in the database parameter also alter any ongoing smoking ships.
MCR: JTLS-2017-13259
Date: 2017-08-04
Status: Accepted
ModelNavyFormation Enter Port Capability

Only indivudual units can be told to enter port. The desire is to create an order when the user can order a formation to enter port.
MCR: JTLS-2017-13258
Date: 2017-08-04
Status: Accepted
C4ITACELINT Message Sevice Operate As Server

Currently the TACELINT Message Service (tems) only operates as a client. It should also have the ability to operate as a server when required,
MCR: JTLS-2017-13256
Date: 2017-08-04
Status: Accepted
ModelGroundContamination Area Weapon Information

The desire is to allow the user to filter contamination areas based on the weapon that created the contamination area. Also it would be helpful to know the type of contamination agent, such as nerve, blister, etc.
MCR: JTLS-2017-13204
Date: 2017-06-29
Status: Accepted
ModelLogAdd Targets to Logistic Report

If it is possible we would like to see targets in the logistic report. These targets should appear in the Combat System section of the report. It should also appear in the Logistic Roll-up Report.
MCR: JTLS-2017-13198
Date: 2017-06-16
Status: Accepted
WHIPOrder Group Editor Reload Of Orders

Currently after using the Tech Tool's Order Group Copy, the Synapse and WHIP need to be brought down and brought back up in order to see the newly copied order groups and their orders in the affected WHIPs. This process will be simplified for the user if there was a manner to invoke a reload of any newly copied orders from in the WHIP, such as a reload button on the Order Group Editor, to avoid the need to restart the Synapse and any WHIPs.
MCR: JTLS-2017-13197
Date: 2017-05-30
Status: Accepted
ModelAirWant Summary Mission Report for a Specific Time Period

During a major exercise, the senior officer serving as Air Controller requested that the model generated an on-demand summary report for all missions in a specific time period (such as the ATO period, or for a certain range of hours).
MCR: JTLS-2017-13196
Date: 2017-05-30
Status: Accepted
ModelAirAutomatic Mission Report After Important Events

At a recent major exercise, the senior officer in charge of the air cell requested that the model provide an automatically generated report every time an air mission experiences an important event (such as dropped weapons, lost an aircraft, reached the rendezvous point). These messages will alert the coordinator to know that certain events occurred as planned.
MCR: JTLS-2017-13146
Date: 2017-05-29
Status: Accepted
ModelAirHandling Overlapping Sensors On Air Mission

When multiple sensors are collecting intelligence information, the model does not want to keep multiple versions of an information update on a given object. When a sensor detects and object, the model determines whether the sensor that detected the object is “better’ than the previous sensor that detected the object. The concept of “better’ is not easy to quantify because there are several characteristics to consider such as: -->The time to report the information -->The classification level of the detection -->The type of report that the sensor will generate. The concept of overlapping sensor detection from the same air mission needs to be looked at in detail and a workable solution to the dilemma needs to be established and implemented.
MCR: JTLS-2017-13145
Date: 2017-05-29
Status: Accepted
ModelAirAircraft Orbit Fuel Consumption Savings

When an aircraft is orbiting, it does not use fuel at the same rate it uses when flying. This is definitely true for the P3 aircraft in which two of the 4 engines are turned off while the aircraft is on station thus saving fuel and extending the time it can stay on station. This needs too be modeled.
MCR: JTLS-2017-13144
Date: 2017-05-29
Status: Accepted
ModelAirAircraft Load Flexibility

Cannot change weapon load while a mission is on alert posture. Must cancel the mission and re-submit with the desired weapon load. This creates unnecessary work in an ops-tempo environment.
MCR: JTLS-2017-13143
Date: 2017-05-29
Status: Accepted
ModelAirInterceptor Speed When In Position

An air mission was intercepting at 525 knots (weapons hold). The intercepted mission was flying at 248 knots. When the missions coincided, the intercepting air mission maintained 525 knots. The interceptor should have slowed down to match the intercepted mission’s speed to conserve fuel.
MCR: JTLS-2017-13142
Date: 2017-05-29
Status: Accepted
WHIPRemove Inactive Formations From WHIP

Formation icon should be destroyed after the last ship leaves the formation or is destroyed.
MCR: JTLS-2017-13141
Date: 2017-05-29
Status: Accepted
WHIPMethod To Know If Message Has Been Read

Player requested an option/button to mark all messages as read in the message browser.
MCR: JTLS-2017-13140
Date: 2017-05-29
Status: Accepted
C4IDSA For Roads

It would be useful to create Directed Search Areas (DSAs) which follow a road, but they should also report with accurate locations of the objects. The proposed road-following DSA would be used for collecting on main supply routes (MSR).
MCR: JTLS-2017-13139
Date: 2017-05-29
Status: In Work
ModelIntelBetter Location Information In IIR Messages

Location information of detected objects in the generated IIR messages needs to be more accurate and detailed. As a side note, the JTLS-GO design team is hoping that the NWARS project will provide examples of more appropriate IIR messages from which a better inherent IIR generation capability can be built within JTLS-GO.